제품 매개변수
재질 : 철선 및 스테인레스 스틸 와이어 304/316
스자좡 시 TangChao 금속 조인트 보강 제품은 ASTM A951(조립 조인트 보강용 강철 와이어의 표준 사양)을 준수합니다.
당사의 제품은 ASTM A951 테스트를 통과했으며 미국에서 테스트했습니다.
인장 강도 - 80,000psi | 항복점 - 최소 70,000psi
아연 코팅:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
와이어 직경:
9 gauge or 3/16ӯ
위의 조합으로 사이드 로드와 크로스 로드를 사용할 수 있습니다.
Cross Rods welded 16” O.C.
블록 크기: Standard Sizes: 4” wall - 16“ wall. Other widths available on special request.
상품 설명
"Masonry joint reinforcement ladder type wire mesh" is a type of trapezoidal metal wire mesh used for the reinforcement of masonry joint. It is made of continuous lengths of joint reinforcement and is embedded in the horizontal mortar joints of the masonry wall.
Usage method
During the construction of the masonry wall, the "Masonry joint reinforcement ladder type wire mesh" is embedded in the horizontal mortar joints. Make sure the mesh is tightly integrated with the masonry wall to provide additional strength and stability. The mesh can be cut to the appropriate size as needed to fit different wall widths.
Manufacturing process
Select the wire or stainless steel wire that meets the standard to weave into a trapezoidal mesh. Weld the nodes of the mesh to ensure its strength and stability. Galvanizing treatment such as galvanizing or hot-dip galvanizing is carried out as required to improve the corrosion resistance. During the production process, the size and quality must be strictly controlled to ensure that the product meets the relevant standards.
